3D Printed Models in Dental Labs: Accuracy, Cost, and Workflow Integration

Posted by Elemental Dental Supply on Nov 21st 2026

By Elemental Dental Supply | November 2026 | Digital Workflow

Digital model printing has moved from a novelty to a production tool in many dental labs. The question is no longer whether 3D-printed models are viable — they are — but when they're the right choice over traditional stone models, and what the workflow implications are for different case types. This article covers the practical aspects: accuracy comparison, cost per model, resin selection, and how to integrate model printing into existing lab workflows without disrupting the cases that still benefit from stone.

The Accuracy Question

The most common objection to printed models is accuracy. This concern is legitimate — early DLP and SLA printers produced models with accuracy that was marginal for crown and bridge fit verification. The current generation of model printers is significantly better, but it's worth understanding what the numbers actually mean for your work.

Published Accuracy vs. Clinical Accuracy

Printer manufacturers publish accuracy figures (typically ±25–100 µm) that represent the best-case printing accuracy. Clinical accuracy for dental models depends on more than the printer — it includes:

  • The intraoral scanner's accuracy (the source data)
  • The accuracy of the model design software (die spacing, articulator attachment geometry)
  • The printer's accuracy
  • Resin dimensional stability after post-curing

Multiple studies comparing printed model accuracy to Type IV stone have found that well-calibrated model printers (DLP or SLA, 50 µm XY resolution or better) produce models with clinically acceptable accuracy for crown, bridge, and clear aligner work — typically within 50–100 µm total error, which is within the range of stone model variability from impression technique.

Where Stone Still Wins on Accuracy

  • Implant model work requiring analog insertion: stone models with precisely set analogs generally have better passive fit for analog placement than printed models, where analog holes must be printed or drilled post-print
  • Partial denture framework fit: metal frameworks require very accurate model surfaces; high-accuracy stone (Type IV) with controlled expansion typically matches or exceeds print accuracy for this application
  • Cases where the clinician insists on conventional impressions (no digital scan available)

Cost Comparison: Printed Model vs. Stone

The economics of model printing favor printed models once the printer is paid for, but the break-even analysis depends on your volume.

Stone Model Cost Per Arch

  • Type IV stone (material): ~$0.40–0.80 per arch
  • Impression material (polyvinyl siloxane or polyether): $2.00–4.00 per arch
  • Technician time (pouring, trimming, articulating): 15–25 minutes per case
  • Total cost per arch (excluding labor): approximately $3–6
  • Including labor at $25/hr: $9–16 per arch total

Printed Model Cost Per Arch

  • Resin material: $0.80–2.00 per arch (depends on resin brand and model size)
  • Printer amortization (e.g., $8,000 printer over 5 years, 20 models/day): ~$0.20–0.30 per model
  • Post-cure unit, IPA wash: minimal per-unit cost
  • Technician time (design + print setup): 5–10 minutes; print time runs unattended
  • Total cost per arch: approximately $1.50–3.00 (material + amortization)
  • Including reduced labor: $3–6 per arch total

Printed models can cut model production costs by 40–60% once the equipment is paid for, primarily through reduced technician time (print jobs run unattended; stone pouring requires active time).

Resin Selection: What Matters for Lab Models

Not all 3D printing resins are appropriate for dental lab models. Critical resin properties:

PropertyWhy It MattersTarget Spec
Dimensional accuracyFit verification for crowns/bridges±50 µm or better post-cure
Surface resolutionMargin detail, contact area visualization50 µm XY or finer
Hardness (Shore D)Withstands die work without damageShore D 80+
Thermal stabilityDoesn't deform when heated for adaptationHDT > 55°C
Biocompatibility classISO compliance if used for direct patient contactISO 10993 Class IIa if intraoral use
Post-cure stabilityDimensions must not change after printingFull cure in ≤20 min; stable thereafter

Recommended Resin Categories

  • Standard model resin (opaque): Good for crown and bridge fit verification, most cost-effective. Examples: Asiga MODEL PRO, NextDent Model 2.0, Formlabs Model Resin.
  • Gingival mask resin (dual-material): Two-material printers or dual-step printing can produce models with pink gingival zones and white die zones for soft tissue simulation. More complex workflow but produces models that are easier for technicians to visualize emergence profiles and pontic contacts.
  • Clear/translucent resin: Useful for aligner and retainer fabrication workflows where light transmission matters.

Workflow Integration: Where to Use Printed Models

Crown and Bridge (Digital Scan Intake)

For digital workflows where the clinician sends an IOS scan:

  1. Receive scan files (STL/OBJ/DCM from scanner export)
  2. Process in model design software (Medit Model Builder, exocad ModelCreator, 3Shape Model Builder)
  3. Add dies, articulator attachment if needed
  4. Send to printer; print and post-cure while designing the restoration
  5. Verify restoration fit on printed model before dispatch

This workflow is fully digital with no impression materials, no stone, no pouring. Throughput per technician-hour is significantly higher than conventional workflow for routine crown and bridge.

Implant Cases

For implant cases, printed models require analog insertion. Two approaches:

  • Printed analog socket: Design the model file with precision analog holes; insert implant analogs after printing and post-curing. This requires good printer accuracy and correctly matched analog hole geometry.
  • Hybrid model: Print the model, then pour stone around the printed gingival mask to create a hybrid model with stone dies for the preparation area. Uncommon but used in some labs.

Orthodontic and Aligner

Orthodontic models are probably the highest-volume printed model application in most labs. Accuracy requirements for aligner staging are within the capability of most model printers. Batch printing (6–8 arches per build) with overnight runs makes orthodontic model production highly efficient.

Post-Processing Protocol

  1. Remove the build platform from the printer; transfer models to the wash station
  2. Wash in isopropyl alcohol (IPA, 95%+) for 5–8 minutes; agitate if using an ultrasonic wash station
  3. Dry with compressed air
  4. Post-cure under UV at specified wavelength (385 nm or 405 nm, depending on resin) for manufacturer-recommended duration — typically 5–15 minutes
  5. Remove support structures carefully with flush cutters; inspect surface quality
  6. Allow to cool to room temperature before any die work

Under-cured models are dimensionally unstable — they will continue to shrink and warp after printing. Always complete the full post-cure cycle regardless of time pressure. An under-cured model that fails fit verification wastes more time than the cure step saves.

Elemental Dental Supply — dental lab equipment and supplies in Tempe, AZ. elementaldentalsupply.com | 866-901-8443