Semi-Adjustable Articulators: A Selection Guide for Labs

Posted by Elemental Dental Supply on Nov 11th 2026

By Elemental Dental Supply | November 2026 | Lab Equipment

An articulator is only as useful as the information it carries. A simple hinge can open and close a pair of models, but it cannot tell you whether a molar cusp will collide in a lateral excursion. A semi-adjustable articulator can get much closer, provided the lab understands what each setting does and the clinic sends records that justify using them.

This guide covers the settings on a typical semi-adjustable instrument, the choice between arbitrary and facebow mounting, and the articulator families EDS carries.

Where Semi-Adjustable Instruments Fit

Articulators are usually grouped into four classes:

  • Simple hinge: open and close only. Fine for a single unit in a stable, well-supported bite.
  • Average-value (fixed): excursive movements built in at average condylar values that cannot be changed.
  • Semi-adjustable: key condylar values can be set from patient records or chosen averages.
  • Fully adjustable: programmed from detailed jaw-tracking records. Rare outside specialist work.

Semi-adjustable articulators cover most lab needs between “single crown on a hinge” and full-mouth reconstruction. You will also see instruments described as arcon (condylar elements on the lower member, guides on the upper, like the natural joint) or non-arcon (the reverse). Arcon designs keep the condylar inclination constant relative to the maxillary occlusal plane as the articulator opens, which is one reason they are common in fixed work.

What the Settings Actually Do

Condylar inclination

This is the steepness of the path the condyle follows as the mandible moves forward. A steeper setting separates the posterior teeth faster in protrusion, which allows taller cusps. A shallower setting means posterior teeth stay close together longer, so cusps need to be flatter to avoid interferences.

Side shift (Bennett movement)

During a lateral movement, the non-working condyle moves forward, down and inward. Immediate side shift is a straight sideways movement at the start of the excursion; progressive side shift is the angle that develops as the movement continues. More side shift means more lateral freedom is needed on the posterior teeth, and it influences where cusp ridges and grooves should run.

Intercondylar width

The distance between the condyles changes the radius of lateral movement arcs across the occlusal table. Some instruments let you choose small, medium or large; many fix it at an average value.

Incisal pin and guide table

The pin holds vertical dimension and the table guides anterior movement. A flat table is common for routine work; adjustable or custom tables let you record and reproduce anterior guidance, which matters when the lab is restoring the anterior teeth that provide it.

Arbitrary vs. Facebow Mounting

In an arbitrary mounting, the maxillary cast is placed on the articulator using average values, often with a mounting table or occlusal plane guide. It is quick and needs nothing from the clinic beyond the casts and a bite.

In a facebow mounting, the clinic records the relationship of the maxillary teeth to the hinge axis (usually an arbitrary or average hinge axis located from the ear rods) and to a reference plane. The lab transfers that relationship to the articulator, so the arc of closure and the orientation of the occlusal plane are closer to the patient’s.

The facebow earns its keep when:

  • The vertical dimension will change, because opening or closing on the wrong arc moves contacts.
  • The case involves complete dentures, full-arch implant work or extensive rehabilitation.
  • You plan to program condylar settings from protrusive or lateral records.
  • Occlusal plane orientation matters for esthetics, such as large anterior cases.

For a single posterior crown in a stable maximum intercuspal position, an arbitrary mounting is usually acceptable. Many digital workflows use a virtual articulator in the same way; our exocad tips on occlusion and contacts cover how those settings show up in design.

Articulator Families Available at EDS

Denar Mark 300 series

Whip Mix makes the Denar Mark 300 series, and EDS lists three models. The Mark 310 uses fixed settings for routine crown and bridge mounting. The Mark 320 adds adjustable condylar inclination and immediate side shift with a fixed progressive side shift. The Mark 330 makes condylar inclination, immediate side shift and progressive side shift all adjustable. All three are listed as compatible with the Denar Slidematic facebow and use magnetic mounting plates.

Whip Mix 2240Q

The Whip Mix 2240Q with QMS is a semi-adjustable articulator with adjustable condylar and incisal guidance. It is set up for the Whip Mix QuickMount facebow system, so it suits labs whose clinics already use QuickMount facebows.

Hanau

Hanau instruments have long been standard in denture departments. EDS’s used-equipment listings include a Hanau Wide-Vue 2, an arcon design known for its open view of the casts, and a Hanau Model H2, a long-running non-arcon instrument with adjustable condylar settings that many removable technicians learned on. Used stock changes, so check the used equipment section for what is currently listed.

How to Choose

  • Match your clinics’ facebows. This is usually the deciding factor. If your dentists use one facebow system, buy articulators that accept its transfer without improvising.
  • Match your case mix. A crown and bridge lab may get the most from fixed or partly adjustable instruments; a removable or full-arch department will use the adjustments.
  • Think about interchangeability. Calibrated instruments let mounted casts move between articulators, and between lab and clinic, without remounting. Check the manufacturer’s calibration guidance.
  • Standardize mounting plates. One plate system across the bench saves time and stops plates from walking off with cases.
  • Plan for upkeep. Articulators wear. Choose a family whose replacement parts you can actually get; our preventive maintenance schedule is a good place to add a periodic articulator check.
Elemental Dental Supply — we carry Denar and Whip Mix articulators plus the mounting plates, incisal pins and parts that keep them working. Shop the Denar Mark 330 or call 866-901-8443.